| 邱枫,戴光,张颖,赵永涛,李承志.储罐底板声源辨识及定位方法研究[J].,2015,34(4):364-372 |
| 储罐底板声源辨识及定位方法研究 |
| Research on acoustic source identification and positioning method of simulated tank bottom |
| 投稿时间：2014-11-19 修订日期：2015-06-23 |
| 中文摘要: |
| 储罐底板腐蚀是多声源问题,即在不同位置的腐蚀源可能同时发射应力波。这些声源信号有时会重叠被传感器接收,从而影响定位的可靠性。为此本文基于平面声发射源能量定位方法的基本理论,进行了模拟储罐底板定位实验,提出了能量定位系数的修正方法。同时通过对实验数据分析,发现快速独立分量分析(FastICA)方法可以将同种声源混合信号进行有效分离,并且基本保持原有波形特征,相干系数法可以实现对分离后的同源信号进行聚类,进而应用改进能量定位方法对声发射源进行定位,从而对声源辨识,判断事件集中度提供依据。 |
| 英文摘要: |
| The acoustic sources of tank bottom corrosion are more than one, that is the sources of corrosion in different locations maybe emission stress waves at the same time. The signals of these acoustic sources would overlap and received by channels, and thus the reliability of positioning will be affected. Based on the acoustic emission source energy location theory of planar, the positioning experiment of simulated tank bottom has been conducted, coefficient correction method of energy positioning was proposed. At the same time,through the analysis of experiment data,it is founded that fast independent component analysis could separate the mixed signals of the same acoustic source, and keep the original waveform character in some degree, correlation coefficient method can cluster the homologous signal after separation, and then improved energy positioning method could be applied to locate acoustic emission source, and thus the identification of acoustic source and the judgment of events concentration can be directed. |
| DOI：10.11684/j.issn.1000-310X.2015.04.013 |
| 中文关键词: 模拟储罐底板,声发射,定位,识别 |
| 英文关键词: Simulated tank bottom Acoustic emission Positioning Identification |
| 基金项目:中国石油天然气集团公司科学研究与技术开发项目（2014D-460203） 东北石油大学研究生创新科研项目（YJSCX2014-024NEPU） |
|
| 摘要点击次数: 2335 |
| 全文下载次数: 2125 |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
