| 王鑫,张金,沈洋,魏影.圆管超声导波频散与多模态特性研究*[J].,2018,37(3):338-344 |
| 圆管超声导波频散与多模态特性研究* |
| The dispersion and multimodal characteristics of ultrasonic guided wave in |
| 投稿时间：2017-07-20 修订日期：2018-04-22 |
| 中文摘要: |
| 超声导波检测技术作为一种新兴的无损检测技术广泛应用于圆管类结构，为选择合适于不同缺陷检测的导波模态，推导分析了圆管导波传播的运动方程和频散方程；利用数值计算的方法得到了超声导波在圆管中传播的频散曲线和各模态沿壁厚方向的位移分布图，分析得出各个模态对不同缺陷的敏感程度；以一种特定圆管为例，建立身管缺陷有限元模型，对不同类型圆管缺陷对导波传播特性的影响进行仿真计算。结果表明，纵向模态对周向缺陷比较敏感，而扭转模态则对轴向缺陷更敏感，仿真结果与理论分析结果相吻合，为圆管缺陷检测的超声导波模态选择提供了理论依据。 |
| 英文摘要: |
| Ultrasonic guided wave detection technology as a new non-destructive testing technology is widely used in circular tube structure. In order to select the suitable wave mode for detecting different defects, the equations of motion and dispersion of the guided wave propagating in the barrel are deducedon the basis of elastic mechanics.The dispersion curve of the ultrasonic guided wave propagating in the barrel and the displacement distribution of each mode along the direction of the wall thickness are obtained with the numerical calculation method, on the basis of whichthe sensitivity of each mode to different defects is analyzed. Take a specific tube as an example，finite element model of tube defects is established, and the impact of different types of tube defects on the characteristics of guided wave propagation is analyzed through simulated calculation.The results show that the longitudinal mode is sensitive to the circumferential defect, and the torsional mode is more sensitive to the axial defect. The simulationresults are in agreement with those of theoretical analysis, providing the theoretical basisfor the mode selection of ultrasonic guided wave to detect theround tube defects. |
| DOI：10.11684/j.issn.1000-310X.2018.03.005 |
| 中文关键词: 超声导波 圆管缺陷 导波频散 模态选择 |
| 英文关键词: Ultrasonic guided wave Barrel defect Guided wave dispersion Modal selection |
| 基金项目:装备预研基金 |
|
| 摘要点击次数: 2130 |
| 全文下载次数: 4636 |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
