| 张云电,喻家英,王纯.超声变幅杆的超声精密加工[J].,1994,12(4):30-33 |
| 超声变幅杆的超声精密加工 |
| Ultrasonic Precision Machining of Ultrasonic Amplitude-Transformer |
| |
| 中文摘要: |
| 本文探讨了超声变幅杆的精密加工．作者研制了双刀反间进给超声车削装置和单刀正向进给超声车削装置，采用了具有频率跟踪系统的晶体营型超声波发生器．超声车削设备连续140min工作时，频率漂移量只有29HZ，最高温度只有38℃．试验结果表明，加工精度可达IT7－ITS，表面粗糙度几可达0．4－0．8m，加工效率提高15倍，有效地解决了超声变幅杆的精密加工难题． |
| 英文摘要: |
| Precision machining of ultrasonic amplitude transformer is investigated in thispaper. ultrasonic turning devices with double tools in opposite-direction feed andwith single tool in regular feed are developed. Transistor generator with frequency-. tracing system is used. when the ultrasonic cutting too1 operates continuously for14o minutes, its highest temperature is but 38to and its frequency floats by only 29Hz.Test results show that machining precision may reach IT7-IT8, surface rou-gliness Ra may reach O.4-O.8pm and machining efficiency may be increased 15times. Precision machining of ultrasonic amplitude transformer can thus be achievedLy an ultrasonic lathe. |
| DOI：10.11684/j.issn.1000-310X.1994.04.007 |
| 中文关键词: 超声车削 超声变幅杆 表面粗糙度 指数形变幅杆 精密加工 超声波发生器 切削用量 硬质合金刀片 临界切削速度 振动频率 |
| 英文关键词: |
| 基金项目: |
|
| 摘要点击次数: 2429 |
| 全文下载次数: 863 |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
