| 翟凡,章德,李勇,谢中华.利用准谐频叉指换能器实现GHz高频SAW滤波器[J].,1999,18(2):6-10 |
| 利用准谐频叉指换能器实现GHz高频SAW滤波器 |
| Implementation of GHz SAW filters using quasi-harmonic interdigital transducers |
| |
| 中文摘要: |
| 本文利用准谐频设计方法，在常规光刻工艺水平上，成功地实现了ＧＨｚ级声表面波（ＳＡＷ）器件。准谐频叉指换能器（ＱＨＩＤＴ）的优点为：其指条宽与指间隙可以比一般的单指换能器宽，克服了单指换能器内指间的多次反射，并且又较好地解决了普通谐频叉指换能器基频抑制不好的缺点。本文给出了制作在ＳＴ石英基片上，工作频率１１２８ＭＨｚ的声表面波滤波器的实验结果。 |
| 英文摘要: |
| In this paper, GHz SAW filters are implemented using the quasi harmonic interdigital transducers (QHIDTs). The advantages of QHIDT are that the width of electrodes in QHIDT is wider than that of normal IDT with single fingers, and therefore the practical GHz SAW filters have been successfully implemented using conventional manufacturing processes. Furthermore, in QHIDT, multi-reflection between fingers can be eliminated and the fundamental frequency signal can be suppressed as well. The simulation of QHIDT is described in the paper, and the experimental results of a SAW filter working at 1128 MHz, fabricated on a ST Quartz substrate, are also shown in this paper. |
| DOI：10.11684/j.issn.1000-310X.1999.02.002 |
| 中文关键词: 声表面波滤波器 准谐频 GHz |
| 英文关键词: SAW filters Quasi harmonic GHz |
| 基金项目: |
|
| 摘要点击次数: 2759 |
| 全文下载次数: 881 |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
