| 王敏慧,鲍善惠.粗细端等长阶梯形变幅杆的有限元分析[J].,2005,24(5):275-280 |
| 粗细端等长阶梯形变幅杆的有限元分析 |
| Finite element analysis of stepped ultrasonic transformer with equal-length sections |
| |
| 中文摘要: |
| 本文利用有限元分析软件ANSYS研究了一组粗细端截面积比不同的阶梯形变幅杆,得出了每个变幅杆的第一阶和第三阶谐振频率、粗细端分界面的相对位移和振幅放大系数。结果表明:ANSYS仿真值与实测值的平均偏差仅为0.3%,远小于常用式解析值与实测值的偏差;变幅杆粗细端分界面的运动类似受牵引的薄膜运动;而振幅放大系数与面积比成正比的结论可扩展到粗细端截面积比为100的情况。 |
| 英文摘要: |
| Finite element method (FEM) is used, through software ANSYS, to analyze stepped ultrasonic transformers, the two sections of which have the same length but different cross-sectional areas. The resonance frequency, the displacement pattern of the interface between the two sections, and the amplitude amplifications of the first-and the third-order vibration modes are computed for each transformer. The results show that the average deviation (0.3%) between the ANSYS simulated frequencies and the experimentally measured values is much less than that between the frequencies calculated from the conventional formula and the experimental; the movement of the section interface of the transformer is similar to that of a towed membrane; a linear relationship between the amplitude amplification and the cross-section-area ratio is obtained, which applies to the later ratio as high as 100. |
| DOI：10.11684/j.issn.1000-310X.2005.05.003 |
| 中文关键词: 阶梯形变幅杆 有限元分析 ANSYS 局部共振 |
| 英文关键词: Stepped ultrasonic transformer FEM ANSYS Local resonance |
| 基金项目:陕西师范大学重点科研基金(995004) |
|
| 摘要点击次数: 2327 |
| 全文下载次数: 943 |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
