| 蒲杰,李平,吴文焘,吕燚.便携式数字B超收发电路的设计与实现[J].,2011,30(2):145-152 |
| 便携式数字B超收发电路的设计与实现 |
| Design and implementation of a transceiver circuit for portable digital ultrasonic imaging equipments |
| |
| 中文摘要: |
| 本文通过不同方案对比,综合权衡信号质量、功耗、面积和成本等因素,提出并实现了一种数字化便携式B超的收发电路设计。在总体结构的基础上,重点分析、介绍了高压开关、收发隔离选通和控制逻辑部分的设计方案,并给出了初步测试和实验结果。设计及测试结果表明设计的便携式B超前端收发电路具有体积小、结构简单、通道一致性好等优点,具有较高的信号质量及较低的信号失真度,并保持较低的功耗,能够实现编码发射;达到了设计目标。 |
| 英文摘要: |
| As a comparison of different schemes,a transceiver circuit is proposed and implemented which trades off in terms of signal quality,power consumption,size and cost,etc. Based on the overall structure,the high-voltage switch,isolation circuit and control logic design are discussed in detail.The results of primary tests and experiments are shown that the proposed circuit has a small size,a simple structure and good consistency among different channels with high signal quality and low signal distortion.Besides,the circuit can realize coded exciting while maintaining low power consumption. |
| DOI：10.11684/j.issn.1000-310X.2011.02.010 |
| 中文关键词: B超 FPGA 收发电路 |
| 英文关键词: B-mode ultrasound scanner FPGA Transceiver |
| 基金项目:中国科学院知识创新工程重要方向项目(KGCX2-YW-915)资助 |
|
| 摘要点击次数: 2558 |
| 全文下载次数: 1350 |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
