| 钟华,孙凯华,孙铭,黄姝珂,周英平.激光超声的多模式合成孔径聚焦成像仿真分析*[J].,2022,41(4):535-547 |
| 激光超声的多模式合成孔径聚焦成像仿真分析* |
| Simulation analysis of multi-mode synthetic aperture focusing technique based on laser ultrasound |
| 投稿时间：2021-05-31 修订日期：2022-07-01 |
| 中文摘要: |
| 针对激光超声体波在检测材料内部缺陷时反射信号弱、信噪比较差的问题，提出了一种基于激光超声的多模式合成孔径成像方法。通过耦合激光激发超声方向性、干涉仪探测超声方向性、超声波与缺陷作用后声场分布方向性得到声场灵敏度图，再根据声场灵敏度图和不同模式波的传播特性预测不同位置分布缺陷的最佳成像模式波，从而使用多模组合的合成孔径成像方法对缺陷成像。使用有限元方法对该成像过程进行数值模拟来验证其可行性，成像结果与理论预测一致。采用这一缺陷成像方法可减小盲区，消除伪像，从而提高图像质量。 |
| 英文摘要: |
| To deal with the weak reflection signal and poor SNR in the detection of internal defects via laser ultrasound, proposed a multi-mode synthetic aperture focusing technique（SAFT）based on laser ultrasound. By coupling the directivity of laser exciting ultrasound、interferometer detecting ultrasound and ultrasonic filed interacting with defects , we can obtain the sensitivity image, then based on the sensitivity image and characteristic of different waves, the most suitable mode for defects in different locations can be determined. Finally, using the multi-mode combination SAFT to image defects. This imaging method is simulated numerically by the finite element method（FEM）to verify its feasibility, simulation results coincide well with the theoretical prediction. The proposed imaging method can reduce blind areas, eliminate fake images and improve the image quality. |
| DOI：10.11684/j.issn.1000-310X.2022.04.005 |
| 中文关键词: 合成孔径 激光超声 内部缺陷 方向性 多模组合成像 |
| 英文关键词: synthetic aperture focusing technique（SAFT） laser ultrasonic internal defects directivity multi-mode combination imaging |
| 基金项目:国家自然科学基金项目（面上项目，重点项目，重大项目） |
|
| 摘要点击次数: 690 |
| 全文下载次数: 1136 |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
