文章摘要
刘国东,祝锡晶,郭策.弱酸试纸法测量功率超声珩磨空化声场的研究*[J].,2014,33(3):269-273
弱酸试纸法测量功率超声珩磨空化声场的研究*
Research on acoustic cavitation field of grinding area in power ultrasonic honingby a weak acid text paper method
投稿时间:2013-05-30  修订日期:2014-04-28
中文摘要:
      为了简便、直观地测量功率超声珩磨磨削区的空化声场强度及分布情况,提出了利用弱酸PH试纸测量磨削区空化声场的方法。利用超声空化效应产生的弱酸空化泡在PH试纸表面溃灭后,形成深浅和分布不同的变色区域,间接地表征油石表面空化声场的强弱和分布规律。通过对比不同超声频率、测试距离和时间,得出了最佳测试距离和时间。结果表明,当超声频率为18.6kHz,距离为10mm时,测得油石表面的空化声场强度和分布最佳。该方法可形象地评价功率超声珩磨磨削区空化声场的强度和分布情况,具有一定的实际应用价值。
英文摘要:
      In order to measure the cavitation acoustic field and its distribution of grinding area in power ultrasonic honing easily and intuitively, a new measurment method using PH value dipping into weak acid is raised. Because of cavitation effect in grinding area occured, the weak acid cavitation bubbles are induced among PH test paper, and then different depth and distribution discolored area are appeared. Taking the whetstone wall of grinding zone into consideration, ultrasonic cavitaion intensity and distribution is obtained indirectly. Compared with different ultrasonic frequency, test distance and time, the optimum test distance and time are obtained. The results show that the optimum sound field distribution on the stone surface is gained, when ultrasonic frequency is 18.6 kHz and the distance between test paper and whetstone surface is 10 mm. This paper provides a new qualitative assessment method for a further study on the intensity and distribution of cavitaion acoustic field of the grinding zone in power ultrasonic honing.
DOI:10.11684/j.issn.1000-310X.2014.03.012
中文关键词: 试纸法,功率超声,空化声场,珩磨
英文关键词: Test  paper method,Power  ultrasonic, Cavitiaon  acoustic field, honing
基金项目:(50975265, 51275490);国家自然科学基金项目(面上项目,重点项目,重大项目)
作者单位E-mail
刘国东 中北大学机械与动力工程学院 太原 030051#$NL liugd9527@nuc.edu.cn 
祝锡晶 中北大学机械与动力工程学院 太原 030051#$NL zhuxj@163.com 
郭策 中北大学机械与动力工程学院 太原 030051#$NL 649287851@qq.com 
摘要点击次数: 2399
全文下载次数: 1084
查看全文   查看/发表评论  下载PDF阅读器
关闭