文章摘要
陈喆,范理,张淑仪,张辉.基于ZnO/SiC结构的Lamb波传感器研究[J].,2015,34(3):207-215
基于ZnO/SiC结构的Lamb波传感器研究
Research on Lamb wave sensor based on ZnO/SiC structure
投稿时间:2014-12-26  修订日期:2015-04-21
中文摘要:
      由于超声波传感器的工作需要极高的灵敏度和稳定度,其性能优化一直是研究的重点之一。本文采用传递矩阵法计算了基于 ZnO/SiC结构的 Lamb波传感器的各项性能,包括机电耦合系数,插入损耗,灵敏度以及较小的最小检测域。根据模拟结果,对 Lamb波传感器的以上性能参数进行了优化,得到了优化工作条件。研究发现, Lamb波多模特性为这种传感器的性能优化提供了丰富的选择性,选择不同的模式,可以对各项性能参数进行不同目的的优化。研究结果对研制高性能的 Lamb波超声传感器具有理论指导作用。
英文摘要:
      The optimization of the ultrasonic sensor is the key to the research because high sensitivity and stability must be assured. In this paper, the transfer matrix method is used to calculate the performance of the Lamb wave sensor based on ZnO/SiC structure, in which the electromechanical coupling coefficients, sensitivities, insert losses and minimum detectable masses are simulated. According to the simulated results, proper working conditions are obtained for optimizing the abovementioned parameters. It is found that different modes of the Lamb wave can be used to optimize different performance parameters. The research results are useful to the design of high-performance Lamb wave sensors.
DOI:10.11684/j.issn.1000-310X.2015.03.004
中文关键词: Lamb波传感器,高阶模式,碳化硅
英文关键词: Lamb wave sensor, High-order mode, Silicon carbide
基金项目:973 项目课题 (2012CB921504), 国家自然科学基金项目 (11374154, 10904067, 11174142)
作者单位E-mail
陈喆 南京大学声学研究所 江苏南京 210093 Fanli@nju.edu.cn 
范理* 南京大学声学研究所 江苏南京 210093 Fanli@nju.edu.cn 
张淑仪 南京大学声学研究所  
张辉 南京大学声学研究所  
摘要点击次数: 2143
全文下载次数: 1504
查看全文   查看/发表评论  下载PDF阅读器
关闭