文章摘要
张 浩,张艳秋,赵梦娟,菅喜岐.基于FPGA的高强度聚焦超声相位控制系统设计*[J].,2018,37(6):855-860
基于FPGA的高强度聚焦超声相位控制系统设计*
Design of high intensity focused ultrasound phase control system based on FPGA
投稿时间:2018-03-01  修订日期:2018-10-31
中文摘要:
      多阵元相控阵换能器具有焦距可调和可实现经颅聚焦等优势,近来受到众多研究者的关注。其相位控制系统是决定多阵元相控换能器能否应用于临床的关键技术之一。在输出信号稳定的同时提高高强度聚焦超声相位控制系统精度是设计过程中的重点与难点。本文基于现场可编程门阵列设计了一种高强度聚焦超声相位控制系统。实测结果表明,多通道延时分辨率为1 ns,延时误差小于1 ns,可满足多阵元高强度聚焦超声治疗相控聚焦换能器延时精度的需要。
英文摘要:
      Multi-element phased array transducer has the advantages of adjustable focal length and transcranial focusing, and has recently attracted the attention of many researchers. The phase control system of the multi-element phased transducer is one of the key technologies for determining whether the multi-element phased phase transducer can be applied to the clinic. Increasing the accuracy of the high intensity focused ultrasound (HIFU) phase control system while the output signal is stable is a key and difficult point in the design process. A HIFU phase control system is designed based on field-programmable gate array (FPGA). The measured results show that the multi-channel delay resolution is 1 ns and the delay error is less than 1 ns, which can meet the needs of multi-element HIFU for phased-focus transducers.
DOI:10.11684/j.issn.1000-310X.2018.06.004
中文关键词: 高强度聚焦超声,相控阵换能器,相位控制系统,延时分辨率,现场可编程门阵列
英文关键词: High intensity focused ultrasound, Phased-array focusing transducer, Phase control system, Delay resolution, Field-programmable gate array
基金项目:天津市自然科学基金重点项目 (16JCZDJC32200), 天津医科大学科技成果转化项目
作者单位E-mail
张 浩 天津医科大学 生物医学工程与技术学院 天津 300070 15222659805@163.com 
张艳秋 天津医科大学 生物医学工程与技术学院 天津 300070 1562090290@qq.com 
赵梦娟 天津医科大学 生物医学工程与技术学院 天津 300070 1490673137@qq.com 
菅喜岐* 天津医科大学 生物医学工程与技术学院 天津 300070 jianxiqi@tmu.edu.cn 
摘要点击次数: 1719
全文下载次数: 1311
查看全文   查看/发表评论  下载PDF阅读器
关闭