文章摘要
张云电,王纯,喻家英.立式超声珩磨设备的研制[J].,1994,12(5):18-22
立式超声珩磨设备的研制
Development of Vertical Ultrasonic Honing Device
  
中文摘要:
      本文介绍了立式超声珩磨设备的设计理论和特点.在研制卧式超声珩磨设备的基础上,我们提出了在机床不停机的条件下使油石胀开以及珩磨杆、珩磨头体均不振动的设计思想,并采取了两条相应的措施:(1)采用有圆柱孔的压电换能器和变幅杆;(2)在弯曲振动圆盘的圆周节线处制有四分之一波长的声绝缘杆,然后将珩磨杆安装在声绝缘杆上.对立式超声珩磨设备的温升进行了测试,并采取了相应的降温措施,立式超声珩磨设备的最高温度可以控制在40℃,频率漂移量减少39.6%.最后,讨论了立式超声珩磨设备的应用范围.
英文摘要:
      The theory of design and characteristics of the vertical ultrasonic honing device are presented. The designing thought that the abrasive sticks be expanded during machine tool operation and the honing bar and the honing head base should not vibrate is proposed. Two solutions are adopted: (1) a piezoelectric transducer and ultrasoinc amplitude trensformer with a cylindrical hole in the center; (2) a 1/4 wavelength sound insulation bar at the vibration node of a vibration disc, to which the honing bar is assembled. Temperature increase of vertical ultrasonic honing device is measured, and method of decreasing the temperature is adopted. The highest temperature of the device can be controlled to 40℃, and frequency floating reduced by 39.6%. Finally, the fields of the device is mentioned.
DOI:10.11684/j.issn.1000-310X.1994.05.005
中文关键词: 超声珩磨  换能器  弯曲振动  超声波发生器  变幅杆  油石  磁致伸缩  共振频率  超声振动系统  圆柱孔
英文关键词: 
基金项目:
作者单位
张云电 杭州电子工业学院机械工程系!杭州310037 
王纯 杭州电子工业学院机械工程系!杭州310037 
喻家英 杭州电子工业学院机械工程系!杭州310037 
摘要点击次数: 1094
全文下载次数: 167
查看全文   查看/发表评论  下载PDF阅读器
关闭