文章摘要
高慧,周笃强,牛聪敏,李明锋,程明昆.多路噪声测量系统的研制[J].,2000,19(2):1-5
多路噪声测量系统的研制
Development of a multiple-channel noise measuring system
  
中文摘要:
      本文描述了多路噪声测量系统的建立,该系统是一套以微机为中心的数字化系统,可实现对4路稳态宽带噪声的测量,测量参数是线性声压级和倍频带声压级.系统由微机、TMS320C30板、多路AD板、传感器、放大器等设备构成硬件系统,并通过编制C30板嵌入式软件和微机主控程序实现系统功能,在软件编制中结合数字信号处理技术,并结合硬件特性优化程序设计.本系统测量方法简易、快捷和精度高,在噪声测量领域具有较高实用价值.
英文摘要:
      This paper describes a multiple-channel noise measurement system, which is a digital system and uses a computer as its core. The system measures four channels wideband noise simultaneously. The measured parameters are the sound pressure level and the sound pressure level of octave band. The hardware in system consists of computer, digital processing card(TMS320C30), analog-to-digital converter, sensors and amplifiers. The software included the embedded software of C30 card and the master control program of the computer. In the software design, the hardware properties are taken into account, and the digital processing technique is adopted. The system is easy to use, the measurement is quick, and the results of the measured acoustic parameters are accurate. It could be very useful in the noise measurement field.
DOI:10.11684/j.issn.1000-310X.2000.02.001
中文关键词: 噪声  噪声测量  数字处理
英文关键词: Noise  Noise measurement  Digital processing
基金项目:
作者单位
高慧 中科院声学所!北京100080 
周笃强 中科院声学所!北京100080 
牛聪敏 中科院声学所!北京100080 
李明锋 中科院声学所!北京100080 
程明昆 中科院声学所!北京100080 
摘要点击次数: 1186
全文下载次数: 129
查看全文   查看/发表评论  下载PDF阅读器
关闭