文章摘要
秦廷辉,黄广伦,曹亮,朱勇.利用锥型换能器的宽带低损耗声表面波滤波器设计[J].,2000,19(4):18-21,17
利用锥型换能器的宽带低损耗声表面波滤波器设计
Design of wide-band low-loss SAW filter using tapered transducer
  
中文摘要:
      分析锥型技能器的基本原则是把换能器沿孔径方向划分成足够多的通道来进行近似,设计制作的关键是加权技术和数据处理技巧。由于SPUDT的特性,把EWC型的SPUDT引入到锥型换能器对制作宽带、低损耗器件是十分有用的;我们在Y128?LN基片上采用一般型和SPUDT型锥型换能器制作了相对带宽约15%的声表面波滤波器,一个换能器采用“块加权”,另一个换能器采用抽指加权。文中给出了两种器件的实验结果,SPUDT型声表面波滤波器的插损仅7.5dB。
英文摘要:
      The method for analyzing tapered transducer to divide the transducers into a large number of channels parallel to the propagation direction of the SAW.The key of design is the technology of weighting and photo masking and that of data processing.Because of SPUDT’s characteristic. It is very useful to design wide-band low loss SAWF using tapered EWC- SPUDT transducer; Two kinds of SAWF using respectively usual and SPUDT tapered transducers with 15% fractional bandwidth are designed on Y128 ’LN.One transducer is block weighted, and the other one withdrawal- weighted. The experimental results are presented in this paper, The loss of SAWF using tapered SPUDT transducer is only 7.5dB.
DOI:10.11684/j.issn.1000-310X.2000.04.006
中文关键词: 声表面波滤波器  宽带低损耗锥型换能器  加权
英文关键词: SAW filter  Wide band-low loss tapered transducer  Weighting
基金项目:
作者单位
秦廷辉 重庆信息产业部第26研究所!重庆400060 
黄广伦 重庆信息产业部第26研究所!重庆400060 
曹亮 重庆信息产业部第26研究所!重庆400060 
朱勇 重庆信息产业部第26研究所!重庆400060 
摘要点击次数: 1005
全文下载次数: 140
查看全文   查看/发表评论  下载PDF阅读器
关闭