文章摘要
彭春,香勇,彭雪莲,施克仁,徐西刚,孙文龙.基于时间融合的波形方式高精度超声测厚[J].,2005,24(2):93-96
基于时间融合的波形方式高精度超声测厚
High-accuracy ultrasound thickness measurement with waveform based on time fusion algorithm
  
中文摘要:
      在超声测厚过程中使用波形方式利用闸门进行测量,可以方便自由地选取测量对象,有利于 避开盲区测量;同时还可以设置闸门和峰值或边沿的测量方式,有利于减小测量误差。在测量中,特 征计算采用基于采样序列较基于显示序列精度要高,采样率越高,精度越好;在此基础上,加入多时 间序列的融合算法可以将有效采样率成倍提高,精度也得到相应的改善。
英文摘要:
      During ultrasound thickness measurement with waveform, we can examine the interested areas and avoid the influence of the blind zone by using a convenient gate. After properly setting the gate mode and detect mode, we may obtain better accuracy. In this paper, we make comparison between calculation with characteristic sample point from AD sampling sequence and that with sampling from display sequence, the former having better precision. Furthermore, on applying Time Fusion algorithm based on sampling sequence, the effective sampling rate can be multifoldly increased and the precision of result greatly improved.
DOI:10.11684/j.issn.1000-310X.2005.02.007
中文关键词: 超声测厚  时间融合  波形方式
英文关键词: Ultrasound thickness measure  Information fusion  Waveform.
基金项目:清华大学"985"重点基金资助项目"无损检测与质量控制"(012-081100501)
作者单位
彭春 北京大学医学部
北京 100083 
香勇 清华大学机械工程系
北京 100084 
彭雪莲 时代集团公司北京 100085 
施克仁 清华大学机械工程系
北京 100084 
徐西刚 清华大学机械工程系
北京 100084 
孙文龙 时代集团公司北京 100085 
摘要点击次数: 2247
全文下载次数: 501
查看全文   查看/发表评论  下载PDF阅读器
关闭