文章摘要
谢成祥,张健,邓志良.基于单片机的超声冲击装置频率跟踪控制和恒幅控制[J].,2006,25(4):201-205
基于单片机的超声冲击装置频率跟踪控制和恒幅控制
Single-chip microcomputer based frequency tracking and amplitude stabilizing for ultrasonic peening equipment
  
中文摘要:
      对超声波冲击以提高焊接接头疲劳强度的装置进行了研究,研制出一台可用于实际冲击处理的样机。该样机以单片机为核心,采用自适应带通滤波器提取超声换能器工作的基波信号,在此基础上获得电流和电压的相位差,根据相位差用模糊控制方法来实现自动频率跟踪;通过电流控制执行机构的输出端振幅,使之恒定不变,对超声冲击处理的质量进行控制。该装置能够适应超声冲击这种负载变化十分剧烈的场合,并可实现准确的频率跟踪和保证冲击处理的质量及效率。
英文摘要:
      The equipment of ultrasonic peening for increasing fatigue strength of a welded joint is imposed and a corresponding ultrasonic peening prototype is manufac- tured.The prototype uses a single chip computer as control unit,an adaptive band-pass filter to obtain fundamental signal from ultrasonic transducer,and also a circuit is de- signed to measure the phase difference between the voltage and current.Fuzzy logic control is introduced to realize automatic frequency tracking according to the phase er- ror,current control keep the output amplitude constant so as to control the quality of the ultrasonic peening.This equipment can adapt to the situation that the peening load varies strongly,and not only realize accurate frequency tracking,but also ensure the peening quality and efficiency.
DOI:10.11684/j.issn.1000-310X.2006.04.002
中文关键词: 超声波冲击  单片机频率跟踪  恒幅输出
英文关键词: Ultrasonic peening  Single chip computer frequency tracking  Constant amplitude output
基金项目:
作者单位
谢成祥 江苏科技大学电子信息学院 镇江 212003 
张健 江苏科技大学电子信息学院 镇江 212003 
邓志良 江苏科技大学电子信息学院 镇江 212003 
摘要点击次数: 1098
全文下载次数: 214
查看全文   查看/发表评论  下载PDF阅读器
关闭