文章摘要
冯冬菊,赵福令,徐占国.使用Inventor软件的超声变幅杆模态分析[J].,2010,29(1):69-73
使用Inventor软件的超声变幅杆模态分析
Modal analysis of ultrasonic horn using the Inventor software
  
中文摘要:
      使用Inventor软件建立超声变幅杆三维实体模型,并利用软件中集成的ANSYS有限元分析模块对其进行了模态分析,得到变幅杆各阶振型和纵向振动固有频率。分析结果表明,固有频率的模态分析值与实测值接近。Inventor软件将形状设计与力学分析集为一体,方便了变幅杆的设计。
英文摘要:
      A Three-dimensional entity model of ultrasonic horn is built with the Inventor software,and model analysis is carried out by using the ANSYS finite element analysis module existing in the Inventor.Mode of varies order of horn vibration and its natural frequency of longitudinal vibration are obtained.Experimented results show that the model analysis value of frequency is close to the measured value.Shape design and dynamics analysis are integrated in the Inventor software,and thus the design of ultrasonic horn is simplified.
DOI:10.11684/j.issn.1000-310X.2010.01.016
中文关键词: 超声变幅杆  欧特克三维软件  有限元法  模态分析
英文关键词: Ultrasonic Horn  Autodesk Inventor  Finite element methed  Model analysis
基金项目:国家自然科学基金重点基金(50635040)资助
作者单位
冯冬菊 大连理工大学机械工程学院 
赵福令 大连理工大学机械工程学院 
徐占国 大连理工大学电子与信息工程学院 
摘要点击次数: 2687
全文下载次数: 621
查看全文   查看/发表评论  下载PDF阅读器
关闭