Page 166 - 《应用声学》2020年第2期
P. 166

324                                                                                  2020 年 3 月


                          1.0                                    1.0
                          0.8                   x=302 mm         0.8                   y=297 mm
                         ॆʷӑࣨϙ  0.6                             ॆʷӑࣨϙ  0.6


                                                                 0.4
                          0.4
                          0.2                                    0.2

                            0                                      0
                             0   100   200   300   400  500         0   100   200   300  400   500
                                         x/mm                                  y/mm
                                      (a) xவՔ੕᭧                             (b) yவՔ੕᭧
                                               图 18 空耦探头检测成像缺陷处截面
                               Fig. 18 The section of the imaging defect detected by air-coupled sensor


                                                                   electric transducer array[J]. Mechanical Systems & Signal
             4 结论                                                  Processing, 2015, 70–71: 625–636.
                                                                 [6] Han J H, Kim Y J. Time-frequency beamforming for non-
                 本文针对金属板缺陷检测提出了空耦超声检                               destructive evaluations of plate using ultrasonic Lamb
             测方法,通过对铝板试样进行有限元仿真和实验分                                wave[J]. Mechanical Systems & Signal Processing, 2014,
             析,比较了压电片检测和空耦超声检测两种方法的                                54–55: 336–356.
                                                                 [7] 刘洋, 王乘, 张锋. 基于压电晶体传感器的椭圆损伤定位算
             检测效果,主要结论如下:                                          法 [J]. 传感技术学报, 2005, 18(3): 596–600.
                 (1) 空耦超声检测相对于压电片检测具有更高                            Liu Yang, Wang Cheng, Zhang Feng. Piezoelectric wafer-
             的检测精度,在实验中采用空耦超声检测方法能准                                based damage localization using ellipses method[J]. Chi-
                                                                   nese Journal of Sensors and Actuators, 2005, 18(3):
             确地定位出缺陷位置。
                                                                   596–600.
                 (2) 单侧激励情况下,可以采用 A0 模态 Lamb                     [8] Yu L, Leckey C A C. Lamb wave-based quantitative crack
             波进行金属板内部缺陷检测。                                         detection using a focusing array algorithm[J]. Journal of
                 (3) 采用压电片检测会受到 S0 模态 Lamb 波影                      Intelligent Material Systems and Structures, 2013, 24(9):
                                                                   1138–1152.
             响,在最终成像中产生伪像,采用空耦检测能避免该
                                                                 [9] 张海燕, 孙修立, 曹亚萍, 等. 基于时间反转理论的聚焦 Lamb
             影响。                                                   波结构损伤成像 [J]. 物理学报, 2010, 59(10): 7111–7119.
                                                                   Zhang Haiyan, Sun Xiuli, Cao Yaping, et al. Structural
                            参 考     文   献                          damage imaging based on time-reversal theory for focus-
                                                                   ing of Lamb waves[J]. Acta Physica Sinica, 2010, 59(10):
              [1] Chen S, Zhou S, Li Y, et al. Distance-coefficient-based
                                                                   7111–7119.
                 imaging accuracy improving method based on the lamb
                                                                [10] 刘增华, 徐营赞, 何存富, 等. 板状结构中基于 Lamb 波单模
                 wave[J]. Chinese Physics Letters, 2017, 34(4): 044301.
              [2] Chang J I, Lin C. A study of storage tank accidents[J].  态的缺陷成像试验研究 [J]. 工程力学, 2014, 31(4): 232–238.
                 Journal of Loss Prevention in the Process Industries, 2006,  Liu Zenghua, Xu Yingzan, He Cunfu, et al. Experimental
                                                                   study on defect imaging based on single Lamb wave mode
                 19(1): 51–59.
              [3] Zhao X, Gao H, Zhang G, et al.  Active health mon-  in plate-like structures[J]. Engineering Mechanics, 2014,
                 itoring of an aircraft wing with embedded piezoelectric  31(4): 232–238.
                 sensor/actuator network: I. Defect detection, localization  [11] J L. 罗斯. 固体中的超声波 [M]. 何存富, 吴斌, 王秀彦, 译.
                 and growth monitoring[J]. Smart Materials & Structures,  北京: 科学出版社, 2004: 82–92, 125–126.
                 2007, 16(4): 1208–1217.                        [12] 鲁光涛. 基于兰姆波的薄壁结构损伤识别 [D]. 武汉: 武汉科
              [4] 张海燕, 于建波, 孙修立, 等. HHT 在 Lamb 波检测信号分析             技大学, 2017.
                 中的应用 [J]. 振动. 测试与诊断, 2010, 30(3): 223–226, 335.  [13] 尹本进, 李友荣, 鲁光涛. 基于 Lamb 波混合成像算法的薄板
                 Zhang Haiyan, Yu Jianbo, Sun Xiuli, et al. Analysis of  结构损伤定位 [J]. 武汉科技大学学报, 2017, 40(2): 132–137.
                 Lamb wave signal using Hilbert-Huang Transform[J]. Vi-  Yin Benjin, Li Yourong, Lu Guangtao. Damage location
                 bration Testing and Diagnosis, 2010, 30(3): 223–226, 335.  for thin plate structures using hybrid imaging algorithm
              [5] Liu Z, Sun K, Song G, et al.  Damage localization in  based on Lamb waves[J]. Journal of Wuhan University of
                 aluminum plate with compact rectangular phased piezo-  Science and Technology, 2017, 40(2): 132–137.
   161   162   163   164   165   166   167   168