Page 81 - 《应用声学》2020年第6期

第 39 卷 第 6 期 王铮等： 小直径棒材纵波斜入射检测仿真分析 875

control technology of wire manufacturing for aeronauti- Xu Shanliao, Wang Xiaokai, Song Yuke. The detection for
cal titanium alloy fastener[J]. Aeronautical Manufacturing inner defects of parts based on the distributed ultrasonic
Technology, 2013(11): 66–68, 73. transducer testing method[J]. Journal of Applied Acous-
[2] 蔡建明, 弭光宝, 高帆, 等. 航空发动机用先进高温钛合金材 tics, 2017, 36(4): 357–364.
料技术研究与发展 [J]. 材料工程, 2016, 44(8): 1–10. [10] 兰贤辉, 彭常户, 范志山, 等. 钛合金小棒材超声波检测缺陷
Cai Jianming, Mi Guangbao, Gao Fan, et al. Research 漏检原因 [J]. 无损检测, 2015, 37(1): 67–68, 89.
and development of some advanced high temperature ti- Lan Xianhui, Peng Changhu, Fan Zhishan, et al. Reasons
tanium alloys for aero-engine[J]. Journal of Materials En- of undetected flaws in ultrasonic detection of titanium al-
gineering, 2016, 44(8): 1–10. loy bars[J]. Nondestructive Test, 2015, 37(1): 67–68, 89.
[3] 闻小德, 张晗, 姚晓峰. 棒材矫直过程中表面缺陷的成因及对 [11] 何春艳, 朱康平, 文宁. TC1 钛合金棒材超声波检测过程中未
策 [J]. 轧钢, 2013, 30(S1): 170–172. 超标异常波的分析 [J]. 钛工业进展, 2009, 26(5): 38–41.
Wen Xiaode, Zhang Han, Yao Xiaofeng. Causes analysis He Chunyan, Zhu Kangping, Wen Ning. Analysis of ex-
of surface defect on the straightened bar and its counter- traordinary wave in ultrasonic testing examination of TC1
measures[J]. Steel Rolling, 2013, 30(S1): 170–172. titanium alloy bar[J]. Titanium Industry Progress, 2009,
[4] 王军, 刘建, 杨庚朝. 42CrMo 表面裂纹的分析与改进 [J]. 金 26(5): 38–41.
属材料与冶金工程, 2012, 40(2): 32–35. [12] 宋雨珂, 汪小凯, 华林. 轴类零件内部缺陷超声检测与重构方
Wang Jun, Liu Jian, Yang Gengchao. Analyzing and 法研究 [J]. 应用声学, 2016, 35(2): 109–115.
mending on the surface crackles of 42CrMo bar[J]. Song Yuke, Wang Xiaokai, Hua Lin. Research on ultra-
Metal Materials and Metallurgy Engineering, 2012, 40(2): sonic test and reconstruction method of the internal de-
32–35. fects in shaft parts[J]. Journal of Applied Acoustics, 2016,
[5] 高海燕, 王俊, 孙宝德. 冷加工镍 -铬合金棒材表面缺陷分 35(2): 109–115.
析 [J]. 机械工程材料, 2005, 29(7): 59–60, 67. [13] Mohammed M S, Ki-Seong K. Probability of detection
Gao Haiyan, Wang Jun, Sun Baode. Analysis of the sur- simulations to study the influence of surface roughness
face defects in cold-drawn Ni-Cr alloy bars[J]. Materials on the reliability of ultrasonic testing system[J]. Russian
for Mechanical Engineering, 2005, 29(7): 59–60, 67. Journal of Nondestructive Testing, 2014, 50(4): 239–247.
[6] 毛江虹, 王建淦, 张谊, 等. 小规格钛棒材成分偏析缺陷的超 [14] Wirdelius H, Persson G. Simulation based validation of
声波检测 [J]. 中国有色金属学报, 2010, 20(S1): 1024–1029. the detection capacity of an ultrasonic inspection proce-
Mao Jianghong, Wang Jiangan, Zhang Yi, et al. Ultra- dure[J]. International Journal of Fatigue, 2012, 41: 23–29.
sonic inspection of composition segregation in small diam- [15] Yin X T, Morris S A, O’Brien W D, et al. Ultrasonic
eters titanium bars[J]. The Chinese Journal of Nonferrous pulse-echo sub-wavelength defect detection mechanism:
Metals, 2010, 20(S1): 1024–1029. experiment and simulation[J]. Journal of Nondestructive
[7] 钱鑫源. 钛合金的超声波检验 [J]. 材料工程, 1992(6): 29–32. Evaluation, 2003, 22(3): 103–115.
Qian Xinyuan. The ultrasonic inspection of titanium al- [16]《国防科技工业无损检测人员资格鉴定与认证培训教材》编审
loy[J]. Materials Engineering, 1992(6): 29–32. 委员会. 超声检测 [M]. 北京: 机械工业出版社, 2005: 23–26.
[8] Alberti N, Barcellona A, Masnata A, et al. Central burst- [17] 王常玺, 刚铁, 王龙, 等. 相控阵 B 扫描衍射波对隧道型缺陷
ing defects in drawing and extrusion: numerical and ul- 尺寸的测定 [J]. 无损检测, 2015, 37(2): 2–4, 9.
trasonic evaluation[J]. Manufacturing Technology, 1993, Wang Changxi, Gang Tie, Wang Long, et al. The mea-
42(1): 269–272. surement of the tunnel defects size by means of the
[9] 许善燎, 汪小凯, 宋雨珂. 基于分布式超声无损检测方法的零 diffracted wave in phased array B-scan images[J]. Non-
件内部缺陷检测 [J]. 应用声学, 2017, 36(4): 357–364. destructive Test, 2015, 37(2): 2–4, 9.