Page 84 - 《应用声学》2023年第3期

P. 84

522 2023 年 5 月

的均匀性受到影响。通过在 USP 强化加工的过程 ods[J]. Advances in Engineering Software, 2010, 41(12):
中辅助工件往复运动的方式，可以有效提高工件表 1266–1276.
[7] Marteau J, Bigerelle M. Relation between surface harden-
面强化的均匀性。
ing and roughness induced by ultrasonic shot peening[J].
(2) 在 USP 强化加工的过程中，随着工件往复 Tribology International, 2015, 83: 105–113.
运动频率的增加，工件表面残余应力分布的均匀性 [8] 杨天南, 林爽, 蔡晋. 超声喷丸激励振动幅值对 TC4 钛合金表
面状态影响的仿真研究 [J]. 航空精密制造技术, 2020, 56(4):
得到改善，工件表面强化的均匀性得到提升。但工
14–18.
件运动并不影响残余压应力在工件沿深度方向的 Yang Tiannan, Lin Shuang, Cai Jin. Simulation study
分布，工件表面硬度变化量无明显变化，工件运动并 of eﬀect of excited vibration on ultrasonic shot peening
surface state of TC4 titanium alloy[J]. Aviation Precision
不能增强工件表面硬度。
Manufacturing Technology, 2020, 56(4): 14–18.
(3) 在 USP 强化加工的过程中，随着强化加工 [9] Qiang B, Li Y, Yao C, et al. Eﬀect of shot peening cover-
时间的增加，工件表面显微硬度增大，显微硬度方差 age on residual stress ﬁeld and surface roughness[J]. Sur-
face Engineering, 2018, 34(12): 938–945.
值减少，工件表面强化的均匀性得到提升。
[10] 逄孟达. 超声喷丸设备设计及工艺效果研究 [D]. 太原: 太原
理工大学, 2009.
[11] Meguid S A, Shagal G, Stranart G C. 3D FE analysis of
参考文献 peeing of strain-rate sensitive materials using multiple im-
pingement model[J]. International Journal of Impact En-
[1] Yin F, Rakita M, Hu S, et al. Overview of ultrasonic shot gineering, 2002, 27(2): 119–134.
peening[J]. Surface Engineering, 2017, 33(9): 651–666. [12] 段宇飞. 旋转超声冲击表面强化的实验研究 [D]. 太原: 太原
[2] Voorwald H J C, Silva M P, Costa M Y P, et al. Improve- 理工大学, 2016.
ment in the fatigue strength of chromium electroplated [13] 李朝阳, 李道朋, 张炜舜, 等. 压电振子阵列型超声喷丸强
AISI 4340 steel by shot peening[J]. Fatigue & Fracture of 化 [J]. 应用声学, 2022, 41(4): 578–585.
Engineering Materials & Structures, 2010, 32(2): 97–104. Li Zhaoyang, Li Daopeng, Zhang Weishun, et al. Ul-
[3] Benrabah A, Langlade C, Vannes A B. Residual stresses trasonic shot peening with piezoelectric vibrator array[J].
and fretting fatigue[J]. Wear, 1999, 224(2): 267–273. Journal of Applied Acoustics, 2022, 41(4): 578–585.
[4] Harada Y, Saeki Y, Takahashi K. Eﬀect of diﬀerent shot [14] 刘辉, 蔡晋, 孟庆勋, 等. 超声喷丸与传统喷丸对 TC4 钛合
peening treatments on fatigue life in Ti alloy[J]. Materials 金残余应力影响的仿真分析 [J]. 航空发动机, 2020, 46(2):
Science Forum, 2018, 941: 908–913. 87–92.
[5] Yin F, Han Q, Rakita M, et al. Numerical modelling and Liu Hui, Cai Jin, Meng Qingxun, et al. Simulation analy-
experimental approach for shot velocity evaluation dur- sis of inﬂuence of ultrasonic and conventional shot peening
ing ultrasonic shot peening[J]. International Journal of on residual stress of TC4 titanium alloy[J]. Aeroengine,
Computational Materials Science and Surface Engineer- 2020, 46(2): 87–92.
ing, 2015, 6(2): 97–110. [15] Abdullah A, Malaki M, Eskandari A. Strength enhance-
[6] Bhuvaraghan B, Srinivasan S M, Maﬀeo B, et al. Shot ment of the welded structures by ultrasonic peening[J].
peening simulation using discrete and ﬁnite element meth- Materials & Design, 2012, 37: 7–18.

79 80 81 82 83 84 85 86 87 88 89