Page 33 - 《应用声学》2020年第3期

第 39 卷 第 3 期 牛金荣等： 超声辅助磨削杯形砂轮变幅器设计与试验 353

[4] Li C, Zhang F, Meng B, et al. Material removal mecha- [13] 王时英, 吕明, 轧刚. 基于力耦合的非谐振单元组成的超声变
nism and grinding force modelling of ultrasonic vibration 幅器设计 [J]. 振动与冲击, 2012, 31(10): 104–107．
assisted grinding for SiC ceramics[J]. Ceramics Interna- Wang Shiying, Lyu Ming, Ya Gang. Design of an ultra-
tional, 2017, 43(2): 2981–2993. sonic transducer with nonresonant units based on force
[5] Wu Q, Luo Y, Liu H, et al. Grinding force in precision ma- coupling[J]. Journal of Vibration and Shock, 2012, 31(10):
chining of WC-Co coating by cup wheel[J]. Transactions of 104–107．
Nanjing University of Aeronautics & Astronautics, 2007, [14] 秦慧斌. 超声珩齿振动系统的非谐振设计理论与实验研
24(1): 134–138. 究 [D]. 太原: 太原理工大学, 2013.
[6] 王少雷, 林彬, 王岩, 等. 杯形砂轮磨削氮化硅陶瓷表面形 [15] 牛金荣, 秦慧斌, 付俊帆, 等. 超声磨削杯形工具变幅器的
貌 [J]. 科学通报, 2015, 60(2): 316–321. 设计与试验分析 [J]. 陕西师范大学学报 (自然科学版), 2018,
Wang Shaolei, Lin Bin, Wang Yan, et al. Surface mor- 46(5): 61–67.
phology of grinding of Si 3 N 4 with cup grinding wheel[J]. Niu Jinrong, Qin Huibin, Fu Junfan, et al. Design and
Chinese Science Bulletin, 2015, 60(2): 316–321. experiment of cup-shaped tool transformer used in ultra-
[7] Brecher C, Schug R, Weber A, et al. New systematic sonic grinding[J]. Journal of Shaanxi Normal University
and time-saving procedure to design cup grinding wheels (Natural Science Edition), 2018, 46(5): 61–67.
for the application of ultrasonic-assisted grinding[J]. The [16] 赵明利, 程雪利, 赵波. 带工具头超声变幅杆节点定位偏差问
International Journal of Advanced Manufacturing Tech- 题分析 [J]. 声学技术, 2013, 32(2): 253–256.
nology, 2010, 47(1–4): 153–159. Zhao Mingli, Cheng Xueli, Zhao Bo. Research on the node
[8] 唐岳. 瓷砖磨边机超声振动系统的设计及实验 [D]. 广州: 广 localization deviation of the ultrasonic amplitude trans-
东工业大学, 2016. former with tool head[J]. Technical Acoustics, 2013, 32(2):
[9] Xu L. Investigation of a cup-shaped ultrasonic transducer 253–256.
operated in the full-wave vibrational mode[J]. Ultrasonics, [17] 陈俊波. 超声变幅杆节点优化设计 [J]. 声学与电子工程,
2015, 59: 109–118. 2009, 95(2): 23–24, 45.
[10] 陈汇资, 赵波, 赵金坠, 等. 杯形工具复合变幅杆设计及振动 Chen Junbo. Node optimization design of ultrasonic
特性分析 [J]. 振动与冲击, 2017, 36(8): 159–165. transformer[J]. Acoustics and Electronics Engineering,
Chen Huizi, Zhao Bo, Zhao Jinzhui, et al. Design of a cup 2009, 95(2): 23–24, 45.
horn and its vibration characteristics analysis[J]. Journal [18] 赵波, 许永强, 郑友益, 等. 基于 ANSYS 的超声变幅杆节点
of Vibration and Shock, 2017, 36(8): 159–165. 优化及振动性能试验 [J]. 河南理工大学学报 (自然科学版),
[11] 赵金坠. 非传统超声加工装置的声学特性研究 [D]. 焦作: 河 2014, 33(2): 304–308.
南理工大学, 2015. Zhao Bo, Xu Yongqiang, Zheng Youyi, et al. Node op-
[12] 马付建, 董志刚, 康仁科, 等. 超声变幅杆与杯型工具一体化 timization of ultrasonic amplitude transformer based on
设计 [J]. 振动工程学报, 2016, 29(1): 231–236. ANSYS and its vibration performance test[J]. Journal of
Ma Fujian, Dong Zhigang, Kang Renke, et al. The inte- Henan Polytechnic University (Natural Science), 2014,
grated design of ultrasonic horn and cupped tool[J]. Jour- 33(2): 304–308.
nal of Vibration Engineering, 2016, 29(1): 231–236.