Page 99 - 《应用声学》2020年第6期

第 39 卷 第 6 期 唐军等： 微织构超声振动铣削系统的研究 893

统可以满足加工使用要求。 [9] 赵波, 李鹏涛, 张存鹰, 等. 超声振动方向对 TC4 钛合金铣削
(4) 通过对 7075-T6 铝合金进行纵扭复合超声 特性的影响 [J]. 航空学报, 2020, 41(2): 39–49.
Zhao Bo, Li Pengtao, Zhang Cunying, et al. Effect of
微织构铣削和微织构铣削对比试验，结果表明：微织
ultrasonic vibration direction on milling characteristics of
构超声铣削不仅可以降低 x、y 方向切削力，而且能 TC4 titanium alloy[J]. Acta Aeronautica et Astronautica
够在工件表面形成微织构改变其亲水、疏水特性。 Sinica, 2020, 41(2): 39–49.
[10] 符永宏, 肖开龙, 华希俊, 等. 表面微沟槽车刀的切削性能试
验与性能分析 [J]. 中国表面工程, 2013, 26(6): 106–111.
参 考 文 献 Fu Yonghong, Xiao Kailong, Hua Xijun, et al. Cutting
trial and performance analysis of surface micro-grooves
[1] 黄雪红. 镍基合金 Inconel 718 高速车削摩擦磨损行为研 turning tools[J]. China Surface Engineering, 2013, 26(6):
究 [D]. 济南: 山东大学, 2009. 106–111.
[2] 高玉魁, 赵振业. 齿轮的表面完整性与抗疲劳制造技术的发展 [11] Chen C, Chen Y J, Liu Y, et al. Performance of car-
趋势 [J]. 金属热处理, 2014, 39(4): 1–6. bide tools with micro-texture on titanium alloys cutting
Gao Yukui，Zhao Zhenye. Development trend of surface in dry conditions[J]. Advanced Materials Research, 2012,
integrity and anti-fatigue manufacture of gears[J]. Heat 590: 17–22.
Treatment of Metals, 2014, 39(4): 1–6. [12] 张高峰, 张博文. 微织构参数变化对硬质合金摩擦特性的影
[3] 别文博, 赵波, 王晓博, 等. 超声加工在齿轮抗疲劳制造中的 响 [J]. 机械设计, 2017, 34(3): 25–30.
研究综述与展望 [J]. 表面技术, 2018, 47(7): 35–51. Zhang Gaofeng, Zhang Bowen. Influence of the micro-
Bie Wenbo, Zhao Bo, Wang Xiaobo, et al. Overview textured parametric variations on the cemented carbide
and expectation on gear anti-fatigue manufacture by fraction characteristics[J]. Journal of Machine Design,
ultrasonic-assisted machining[J]. Surface Technology, 2017, 34(3): 25–30.
2018, 47(7): 35–51. [13] 陈碧冲. 微织构刀具的设计与切削性能试验研究 [D]. 北京:
[4] Novovic D, Dewes R, Aspinwall D, et al. The effect of ma- 北京理工大学, 2015.
chined topography and integrity on fatigue life[J]. Inter- [14] 杨树财, 王志伟, 张玉华, 等. 微织构球头铣刀加工钛合金的
national Journal of Machine Tools & Manufacture, 2004, 有限元仿真 [J]. 沈阳工业大学学报, 2015, 37(5): 530–535.
44(2): 125–134. Yang Shucai, Wang Zhiwei, Zhang Yuhua, et al. Finite el-
[5] Gao G, Wang M. The research on three-dimensional the- ement simulation for machining titanium alloy with micro-
oretical model of residual stress on cutting surface[J]. Ap- texture ball-end mill[J]. Journal of Shenyang University of
plied Mechanics and Materials, 2014, 3173: 72–75. Technology, 2015, 37(5): 530–535.
[6] Guo P, Ehmann K F. Development of a tertiary motion [15] Zhu W L, Xing Y, Ehmann K F, et al. Ultrasonic ellipti-
generator for elliptical vibration texturing[J]. Precision cal vibration texturing of the rake face of carbide cutting
Engineering, 2013, 37(2): 364–371. tools for adhesion reduction [J]. The International Journal
[7] 曹腾. 超声椭圆振动辅助切削表面微织构及其摩擦性能研 of Advanced Manufacturing Technology, 2015, 85(9–12):
究 [D]. 南昌: 南昌航空大学, 2018. 1–11.
[8] 姜兴刚, 梁海彤, 卢慧敏, 等. 钛合金薄壁件超声椭圆振动铣 [16] 唐军. 碳/碳化硅材料纵扭复合超声铣削系统及加工稳定性的
削研究 [J]. 兵工学报, 2014, 35(11): 1891–1897. 研究 [D]. 焦作: 河南理工大学, 2015.
Jiang Xinggang, Liang Haitong, Lu Huimin, et al. Inves- [17] Su Y, Li L, He N, et al. Experimental study of fiber laser
tigation of ultrasonic elliptical vibration milling of thin- surface texturing of polycrystalline diamond tools[J]. In-
walled titanium alloy parts[J]. Acta Armamentarii, 2014, ternational Journal of Refractory Metals and Hard Mate-
35(11): 1891–1897. rials, 2014, 45: 117–124.